
Canyon 2005-onwards
Turn ignition to the "ON" position. Press the button below the speedometer until
"OIL-LIFE" is displayed. "OIL LIFE" and "RESET" will flash.
Press and hold button until three chimes are heard. Turn ignition off.
Envoy 2002-onwards
Turn ignition to the "ON" position. Slowly depress accelerator pedal 3 times
within 5 seconds. "CHANGE ENGINE OIL" lamp will flash.
Turn ignition off. Start engine.
Savana2003-onwards
Turn ignition to the "ON" position. Slowly depress accelerator pedal 3 times
within 5 seconds. "CHANGE ENGINE OIL" lamp will flash.
Turn ignition off. Start engine.
Sierra 1999-onwards
Turn ignition to the "ON" position. Slowly depress accelerator pedal 3 times
within 5 seconds. "CHANGE ENGINE OIL" lamp will flash.
Turn ignition off. Start engine. Oil life will display 100%.
Yukon 2000-onwards
Turn ignition to the "ON" position. Slowly depress accelerator pedal 3 times
within 5 seconds. "CHANGE ENGINE OIL" lamp will flash.
Turn ignition off. Start engine. Oil life will display 100%.
With DIC:
Turn ignition to the "ON" position. Press "FUEL INFORMATION" button until
"ENGINE OIL LIFE" is displayed. Press and hold button withthe arrow pointing
left until "OIL LIFE RESET" is displayed.
Yukon Denali 2001-onwards
Turn ignition to the "ON" position. Slowly depress accelerator pedal 3 times
within 5 seconds. "CHANGE ENGINE OIL" lamp will flash.
Turn ignition off. Start engine. Oil life will display 100%.
With DIC:
Turn ignition to the "ON" position. Press "FUEL INFORMATION" button until
"ENGINE OIL LIFE" is displayed. Press and hold button withthe arrow pointing
left until "OIL LIFE RESET" is displayed.
Home
Last update:01-01-10 by K.Kotlowski ©2008-2010